COMPANY
News
HOME > COMPANY > News
Can products from different production plants of the same manufacturer apply for a CCC certificate?
Date：2021/6/22 Clicks：1445
Case question
Can products of the same producer (also known as manufacturer) from different factories apply for a CCC certificate?
case study
Earlier, various certification bodies usually divided into different application units for "products from different manufacturers of the same manufacturer", issued different type test reports, completed different factory inspections, issued different certification certificates, and carried out different certifications. After supervision.
With the deepening reform of certification and accreditation, this restriction is expected to be broken.
National Certification and Accreditation Administration [2021] No. 2 "Notice of CNCA on Further Integration of Compulsory Product Certification Units and Streamlined Change Procedures" stated that "in principle, a certification body only issues one certification certificate for products in the same certification unit. Only one certification certificate is issued for the same product with multiple product functions and uses in the CCC certification catalog. The certification certificates of the same product produced by the same manufacturer and different manufacturers can be combined into one."
There are similar regulations in the international mutual recognition CB system. The CB test report and certificate list the name and address of each manufacturer. Examples are as follows:
Manufacturer’s Declaration per sub-clause 4.2.5 of IECEE 02:
According to IECEE02 4.2.5, the manufacturer declares:
The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided:
The application for obtaining the CB test certificate includes more than one factory location and a manufacturer’s statement stating that the samples submitted for evaluation represent the products of each factory:
☒Yes
□Not applicable
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies):
Name and address of the manufacturer:
1.XXX Co., Ltd.
No.1, street,…, China
2.YYY Co., Ltd.
No.2, street,…, China
Figure CB test report lists examples of each production plant
01 Appendix 1:
Designated certification bodies for compulsory product certification:
In order to implement the "Notice of the General Office of the State Council on Printing and Distributing the Nationally Deepening the Reform of "Decentralization, Management and Service" and Optimizing the Business Environment, the Key Task Division of the Video and Telephone Conference" (Guobanfa [2020] No. 43), "Further integration of over-divided certification units "No need to declare for changes that do not involve product safety", reduce the number of compulsory product certification (CCC certification) certificates, streamline the change procedures, and reduce certification time and costs. The relevant matters are hereby notified as follows:
1. Integrate certification units and merge certification certificates
Institutions should comprehensively sort out the unit division of the product areas involved, modify and improve the implementation rules for certification, and further integrate certification units on the basis of risk control.
In line with the principle of voluntariness of the certification principal (certificate holder), the CCC certificates are merged. In principle, a certification body only issues one certification certificate for products in the same certification unit, and only one certification certificate for the same product with multiple functions and uses in the CCC certification catalog. The same manufacturer and different production plants produce The certification certificates of the same product can be combined into one.
2. Streamline change procedures and optimize service quality
Institutions should streamline and optimize existing change procedures, and there is no need to declare changes that do not affect product safety.
Make more reasonable and optimized procedural arrangements for changes that affect product safety, simplify change requirements (for example, use production enterprise classification management, enterprise self-declaration, etc.), and provide enterprises with more convenient and efficient change services.
3. Develop an implementation plan to ensure effective work
All agencies should attach great importance to them, combine their own practical experience and risk management and control capabilities, quickly formulate implementation plans, earnestly implement them, and report relevant implementation status and work results to our committee before June 15. According to the actual situation, our committee will in-depth research and supervision of CCC certification designated certification agencies and enterprises to ensure that relevant work achieves practical results.
Contact:
Certification Supervision Department Yang Shuwei 010-82260745
Guan Junwen 010-82262674
Information source: http://www.cnca.gov.cn/zw/tz/tz2021/202103/t20210322_65061.shtml
02 Appendix 2:
IECEE 02 IECEE System of Conformity Assessment Schemes for Electrotechnical Equipment and Components Rules of Procedure
4.2.5 When the application for obtaining a CB Test Certificate includes more than one factory location, the Applicant shall include a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory.
A statement shall be included in the CB Test Report confirming Manufacturer’s declaration or where differences exist; they shall be identified in the CB Test Report.
Note: The statement may be the Manufacturer’s declaration
The name and address of each factory shall be reported in the CB Test Report (where applicable for the relevant TRF) and on the CB Test Certificate.
Reference translation:
4.2.5 When the application for obtaining the CB test certificate includes more than one factory location, the applicant should include the manufacturer's statement stating that the submitted evaluation samples represent the products of each factory.
The CB test report should include a statement confirming the manufacturer's statement or the existence of a difference, which should be identified in the CB test report.
Note: The statement may be the manufacturer's statement.
The name and address of each factory should be reported in the CB test report (applicable to the relevant TRF test report format) and the CB test certificate.
Can products of the same producer (also known as manufacturer) from different factories apply for a CCC certificate?
case study
Earlier, various certification bodies usually divided into different application units for "products from different manufacturers of the same manufacturer", issued different type test reports, completed different factory inspections, issued different certification certificates, and carried out different certifications. After supervision.
With the deepening reform of certification and accreditation, this restriction is expected to be broken.
National Certification and Accreditation Administration [2021] No. 2 "Notice of CNCA on Further Integration of Compulsory Product Certification Units and Streamlined Change Procedures" stated that "in principle, a certification body only issues one certification certificate for products in the same certification unit. Only one certification certificate is issued for the same product with multiple product functions and uses in the CCC certification catalog. The certification certificates of the same product produced by the same manufacturer and different manufacturers can be combined into one."
There are similar regulations in the international mutual recognition CB system. The CB test report and certificate list the name and address of each manufacturer. Examples are as follows:
Manufacturer’s Declaration per sub-clause 4.2.5 of IECEE 02:
According to IECEE02 4.2.5, the manufacturer declares:
The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided:
The application for obtaining the CB test certificate includes more than one factory location and a manufacturer’s statement stating that the samples submitted for evaluation represent the products of each factory:
☒Yes
□Not applicable
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies):
Name and address of the manufacturer:
1.XXX Co., Ltd.
No.1, street,…, China
2.YYY Co., Ltd.
No.2, street,…, China
Figure CB test report lists examples of each production plant
01 Appendix 1:
National Accreditation Administration (2021) No. 2
Notice of CNCA on Further Integrating Compulsory Product Certification Units and Streamlining Change Procedures
In order to implement the "Notice of the General Office of the State Council on Printing and Distributing the Nationally Deepening the Reform of "Decentralization, Management and Service" and Optimizing the Business Environment, the Key Task Division of the Video and Telephone Conference" (Guobanfa [2020] No. 43), "Further integration of over-divided certification units "No need to declare for changes that do not involve product safety", reduce the number of compulsory product certification (CCC certification) certificates, streamline the change procedures, and reduce certification time and costs. The relevant matters are hereby notified as follows:
1. Integrate certification units and merge certification certificates
Institutions should comprehensively sort out the unit division of the product areas involved, modify and improve the implementation rules for certification, and further integrate certification units on the basis of risk control.
In line with the principle of voluntariness of the certification principal (certificate holder), the CCC certificates are merged. In principle, a certification body only issues one certification certificate for products in the same certification unit, and only one certification certificate for the same product with multiple functions and uses in the CCC certification catalog. The same manufacturer and different production plants produce The certification certificates of the same product can be combined into one.
2. Streamline change procedures and optimize service quality
Institutions should streamline and optimize existing change procedures, and there is no need to declare changes that do not affect product safety.
Make more reasonable and optimized procedural arrangements for changes that affect product safety, simplify change requirements (for example, use production enterprise classification management, enterprise self-declaration, etc.), and provide enterprises with more convenient and efficient change services.
3. Develop an implementation plan to ensure effective work
All agencies should attach great importance to them, combine their own practical experience and risk management and control capabilities, quickly formulate implementation plans, earnestly implement them, and report relevant implementation status and work results to our committee before June 15. According to the actual situation, our committee will in-depth research and supervision of CCC certification designated certification agencies and enterprises to ensure that relevant work achieves practical results.
Contact:
Certification Supervision Department Yang Shuwei 010-82260745
Guan Junwen 010-82262674
CNCA
March 18, 2021
Information source: http://www.cnca.gov.cn/zw/tz/tz2021/202103/t20210322_65061.shtml
02 Appendix 2:
IECEE 02 IECEE System of Conformity Assessment Schemes for Electrotechnical Equipment and Components Rules of Procedure
4.2.5 When the application for obtaining a CB Test Certificate includes more than one factory location, the Applicant shall include a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory.
A statement shall be included in the CB Test Report confirming Manufacturer’s declaration or where differences exist; they shall be identified in the CB Test Report.
Note: The statement may be the Manufacturer’s declaration
The name and address of each factory shall be reported in the CB Test Report (where applicable for the relevant TRF) and on the CB Test Certificate.
Reference translation:
IECEE 02
"Electrical Equipment and Components Conformity Assessment System Regulations"
4.2.5 When the application for obtaining the CB test certificate includes more than one factory location, the applicant should include the manufacturer's statement stating that the submitted evaluation samples represent the products of each factory.
The CB test report should include a statement confirming the manufacturer's statement or the existence of a difference, which should be identified in the CB test report.
Note: The statement may be the manufacturer's statement.
The name and address of each factory should be reported in the CB test report (applicable to the relevant TRF test report format) and the CB test certificate.
Add.：Room703、705/7F, Development Building, Tian An Hi-Teck Ecological Park, No.555 North Road Panyu Avenue, Panyu District, Guangzhou City, 511400, China
Tel.：020 - 39211670 Fax：020 - 39211640 E-mail:info@certitek.cn