COMPANY
News
HOME > COMPANY > News
In the list of critical parts reported by CCC, the CCC certificate of a device has been cancelled. Is it necessary to replace the device?
Date：2022/4/14 Clicks：679
Questions from the group of friends: I would like to ask you all the great gods. In the list of key components reported by CCC, the compulsory certification certificate of the device has been cancelled. Do we have to replace the device? If it is not replaced, will the factory supervision and inspection be affected?
Friends answered:
group friend A
No effect, as long as it's not a special consistency check. When checking the consistency of the product, pay attention to the validity of the key parts and the corresponding production date.
group friend B
It should have an impact. The key parts need to be checked regularly, and they cannot be used in the whole machine if they expire.
Expert reply:
"In the list of key parts reported by CCC, the compulsory certification certificate of a device has been cancelled. Is it necessary to replace the device?" The "reasons for the cancellation of the compulsory certificate of components" should be analyzed in detail according to the specific situation. It may or may not be necessary to replace it. Change.
There is a small article "Attention! In these cases, the certification body will revoke the company's 3C certificate! ", explaining the cancellation and revocation. In layman's terms, "there are many reasons for the cancellation of the certificate, and the product is not necessarily unqualified."
For example, the whole machine factory purchased 1,000 parts on January 1, and the compulsory certification of the device was cancelled on June 1 due to the "factory closure". If the annual supervision and inspection on August 1 found that the whole machine company still Will there be a non-conformance item when using 500 stocks of this component? The key points of the question are put forward for everyone to discuss:
Is the supplier that went out of business on August 1 still on the "Qualified Suppliers" directory of the complete machine factory?
The parts purchased on January 1st met the standards and had certificates at that time. After August 1st, 500 parts and components were in stock, although there were no certificates, would the products still meet the standards? Can they continue to be installed in the whole machine?
Friends answered:
group friend A
No effect, as long as it's not a special consistency check. When checking the consistency of the product, pay attention to the validity of the key parts and the corresponding production date.
group friend B
It should have an impact. The key parts need to be checked regularly, and they cannot be used in the whole machine if they expire.
Expert reply:
"In the list of key parts reported by CCC, the compulsory certification certificate of a device has been cancelled. Is it necessary to replace the device?" The "reasons for the cancellation of the compulsory certificate of components" should be analyzed in detail according to the specific situation. It may or may not be necessary to replace it. Change.
There is a small article "Attention! In these cases, the certification body will revoke the company's 3C certificate! ", explaining the cancellation and revocation. In layman's terms, "there are many reasons for the cancellation of the certificate, and the product is not necessarily unqualified."
For example, the whole machine factory purchased 1,000 parts on January 1, and the compulsory certification of the device was cancelled on June 1 due to the "factory closure". If the annual supervision and inspection on August 1 found that the whole machine company still Will there be a non-conformance item when using 500 stocks of this component? The key points of the question are put forward for everyone to discuss:
Is the supplier that went out of business on August 1 still on the "Qualified Suppliers" directory of the complete machine factory?
The parts purchased on January 1st met the standards and had certificates at that time. After August 1st, 500 parts and components were in stock, although there were no certificates, would the products still meet the standards? Can they continue to be installed in the whole machine?
Add.：Room703、705/7F, Development Building, Tian An Hi-Teck Ecological Park, No.555 North Road Panyu Avenue, Panyu District, Guangzhou City, 511400, China
Tel.：020 - 39211670 Fax：020 - 39211640 E-mail:info@certitek.cn